Continuous In line Deaerator

quick overview :

Continuous In line Deaerator Features • Batch Processing • Continuous in-line Processing • Autofilling of vessel • Clean In Place (CIP) • Easy to use • Touch screen control – Full colour high resolution (800 x 480) – Displays process flow diagrams and actual status • Automatic operation • Full compatibility with existing UHT systems • Controllable vacuum level • Spray or disc deaeration (batch mode only) • Integrated water feed control for ease of UHT start up • Vacuum levels down to -0.95 bar • Deaeration capabilities of down to 0.5ppm Dissolved O_2. Benefits > Enhancement of product appearance (texture, colour and/or clarity) > Preventing possible oxidation of colours, flavours, or nutritional compounds during heat treatment. > Improving shelf-life by reducing in package oxidation risks. > Reducing potential usage of antioxidants in packaged products > Reducing foaming during processing and/or filling > Improving accuracy and reducing package volumes during filling > Removing dissolved gases enabling increased carbonation levels in carbonated products. Applications Dairy, Ingredients, Liquid foods, Beverages. • Baby foods • Beer • Cream • Desserts and puddings • Fruit and vegetable purees • Fruit juices and cordials • Gelatine products • Gravies • Health and nutritional products • Milk • Pharmaceuticals • Sauces and soups • Yogurts

Description of Continuous In line Deaerator

In batch mode the product is pumped from the vacuum vessel and then returned. As it re-enters the vessel it forms a thin film over a spreader disc, offering a large surface area to the vacuum, hence releasing dissolved gasses. As the product is recirculated over time, more gas is released.

When coupled to Pasteurisation or UHT system, product can be drawn off at the rate required by the progressing cavity pump. Product can either be drawn off until the vessel reaches its minimum limit, can automatically top up the vessel from an external container, using the vacuum to draw in the amount required to top up the vessel. The automatic level control maintains a volume of approximately 10 litres in the vessel.

This vacuum filling mode can also be used to fill the vessel initially, prior to either batch or continuous processing.

Some products benefit from spray deaeration and in batch mode the spreader disc can be replaced by the supplied purpose designed spray ball. This uses multiple nozzles to. produce a fine mist of product, enabling deaeration to be performed over the enhanced surface area of the small droplets. The spray nozzle is also used in clean in place mode (CIP). This takes place under control of the Programmable Logic Controller (PLC). The valves are switched automatically to ensure all flow paths are thoroughly cleaned.

A feature of unit is that the UHT system can be provided with a supply of water (or product) for start up whilst still connected. Switching between the water supply and the vessel contents is quickly and cleanly achieved by a single press of the touch screen control. Similarly when the tank is emptied or when the operator wishes to finish the run, it can be easily switched back.