Flow Measurement In Pipes Using Pressure Reducing Parts
Categories:Flow Measurement In Pipes Using Pressure Reducing Parts Teaching Objectives of Flow Measurement In Pipes Using Pressure Reducing Parts Pressure losses generated when the water passes through three st...
Product
Description
Flow Measurement In Pipes Using Pressure Reducing Parts
Teaching Objectives of
Flow Measurement In Pipes Using Pressure Reducing Parts Pressure losses generated when the water passes through three standardised pressure parts (venturi meter, diaphragm, rotameter) are measured, which allows the fluid flow rate to be calculated and compared with a volumetric measure. Comparison of the pressure drop from each measuring device. Comparison of the pressure drop produced by a sudden contraction and a 90° angled pipe.Technical specifications
- A tank made of PVC, outside level with lateral tapping, draining and overflow for flow measuring,
- A tank made of PVC with draining,
- A centrifugal pump,
- A diaphragm,
- A venturi,
- A sudden contraction,
- An elbow 90°,
- A rotameter,
- A valve at the exit of the rotameter,
- A millimetric panel in PVC,
- A battery of piezometric tubes with recuperation chute for measuring of the pressures drops,
- A start/stop box with protection for the pump,
- The bench is made of PVC piping and Altuglass (Venturi, Diaphragm and elbow) and is mounted on a stainless steel frame.
- Supplied with educational and technical documentation.
Equipment Package:
- Valve study.
- Differential pressure sensor.
- Programmable indicator for calibration of diaphragm or venturi only.
- Instead of feeding tank
Dimensions
- 800 x 600 x1 500 mm
Essential Requirements
- Electrical power supply: 220V / 50 Hz
quick overview :
Flow Measurement In Pipes Using Pressure Reducing Parts
Teaching Objectives of
Flow Measurement In Pipes Using Pressure Reducing Parts Pressure losses generated when the water passes through three standardised pressure parts (venturi meter, diaphragm, rotameter) are measured, which allows the fluid flow rate to be calculated and compared with a volumetric measure. Comparison of the pressure drop from each measuring device. Comparison of the pressure drop produced by a sudden contraction and a 90° angled pipe.Technical specifications
- A tank made of PVC, outside level with lateral tapping, draining and overflow for flow measuring,
- A tank made of PVC with draining,
- A centrifugal pump,
- A diaphragm,
- A venturi,
- A sudden contraction,
- An elbow 90°,
- A rotameter,
- A valve at the exit of the rotameter,
- A millimetric panel in PVC,
- A battery of piezometric tubes with recuperation chute for measuring of the pressures drops,
- A start/stop box with protection for the pump,
- The bench is made of PVC piping and Altuglass (Venturi, Diaphragm and elbow) and is mounted on a stainless steel frame.
- Supplied with educational and technical documentation.
Equipment Package:
- Valve study.
- Differential pressure sensor.
- Programmable indicator for calibration of diaphragm or venturi only.
- Instead of feeding tank
Dimensions
- 800 x 600 x1 500 mm
Essential Requirements
- Electrical power supply: 220V / 50 Hz
Product
Reviews
add Review
reviews
No Review Yet.
Related
Products
The apparatus consists of converging diverging circular tes...
Impact Of Jet Apparatus It can measure the force generated b...
Losses In Pipe To determine minor flow losses(Fittings) in...
Metacentric Top Equipment Fundamentals of Buoyancy, Metacent...
Notch and Weir Apparatus Notches or Weirs are kept in the p...
Orifice and Mouthpiece Apparatus
Orifice and Mouthpiece Apparatus Both orifices and mouthpiec...
Orifice Meter This equipment is designed to introduce colle...
Pipe Friction Equipment Main Losses In Pipe (Losses Due To...
Copyrights © 2019 All Rights Reserved by Atico
Product
Reviews
add Review
reviews
No Review Yet.