Ground Water Flow Unit
Categories:Bench-standing sand tank capable of demonstrating, on a small scale, the hydrological principles of ground water flow.The unit allows simple three dimensional flow situations to be set up quickly and...
Product
Description
- Bench-standing sand tank capable of demonstrating, on a small scale, the hydrological principles of ground water flow.
- The unit allows simple three dimensional flow situations to be set up quickly and measurements of piezometric levels taken at appropriate positions within the model under study.
- The accompanying instruction manual describes six basic demonstrations of importance in Engineering Hydrology.
Description:
- The sand tank is manufactured in glass reinforced plastic for durability in service and is located in a painted mild steel frame which is designed for standing on a laboratory bench.
- A diffused water inlet/outlet with associated flow control valve is installed at each end of the sand tank. This facility allows the desired water table to be established for the various demonstrations of groundwater flow.
- Two wells with control taps in the base of the tank allow studies of abstraction. Nineteen tappings in the base of the tank arranged in a cruciform configuration are connected to a multi-tube manometer on the side of the tank. These indicate the profile of the water table in the sand. A sliding cursor permits measurement of any level.
- Appropriately sized cylindrical rings are provided as accessories for certain of the demonstrations described above.
Technical Specification:
Tank:
Length: 990mm Width: 490mm Depth: 235mm
Mamometer:
Range: 0 to 155mm Calibrated: 1mm intervals
quick overview :
- Bench-standing sand tank capable of demonstrating, on a small scale, the hydrological principles of ground water flow.
- The unit allows simple three dimensional flow situations to be set up quickly and measurements of piezometric levels taken at appropriate positions within the model under study.
- The accompanying instruction manual describes six basic demonstrations of importance in Engineering Hydrology.
Description:
- The sand tank is manufactured in glass reinforced plastic for durability in service and is located in a painted mild steel frame which is designed for standing on a laboratory bench.
- A diffused water inlet/outlet with associated flow control valve is installed at each end of the sand tank. This facility allows the desired water table to be established for the various demonstrations of groundwater flow.
- Two wells with control taps in the base of the tank allow studies of abstraction. Nineteen tappings in the base of the tank arranged in a cruciform configuration are connected to a multi-tube manometer on the side of the tank. These indicate the profile of the water table in the sand. A sliding cursor permits measurement of any level.
- Appropriately sized cylindrical rings are provided as accessories for certain of the demonstrations described above.
Technical Specification:
Tank:
Length: 990mm Width: 490mm Depth: 235mm
Mamometer:
Range: 0 to 155mm Calibrated: 1mm intervals
Product
Reviews
add Review
reviews
No Review Yet.
Related
Products
The apparatus consists of converging diverging circular tes...
Impact Of Jet Apparatus It can measure the force generated b...
Losses In Pipe To determine minor flow losses(Fittings) in...
Metacentric Top Equipment Fundamentals of Buoyancy, Metacent...
Notch and Weir Apparatus Notches or Weirs are kept in the p...
Orifice and Mouthpiece Apparatus
Orifice and Mouthpiece Apparatus Both orifices and mouthpiec...
Orifice Meter This equipment is designed to introduce colle...
Pipe Friction Equipment Main Losses In Pipe (Losses Due To...
Copyrights © 2019 All Rights Reserved by Atico
Product
Reviews
add Review
reviews
No Review Yet.