Horizontal Fluid Friction Plant
Categories:Horizontal Fluid Friction Plant Teaching Objectives of: Horizontal Fluid Friction Plant Study of the principal elements in an installation of piping. Measurement of pressure losses generated by t...
Product
Description
Horizontal Fluid Friction Plant
Teaching Objectives of:
Horizontal Fluid Friction Plant- Study of the principal elements in an installation of piping.
- Measurement of pressure losses generated by these various elements by means of manometric panel or/and electronic probe with transmitter.
- Visualization of the flows in the pressure reducing conduits and orifices
- Observation of the modes of laminar flow and turbulent according to the flows and pressures
Study of the regular pressure losses of:
- Piping of various diameters
- Piping smooth and rough
- Piping rising, downward and tilted
Study of the individual pressure losses of:
- Elbows of various angles
- abrupt increase or reduction of the piping diameter
- various valves Calibration of the pressure reducing orifices (venturi, diaphragm) Measurement of the flows by pressure reducing orifices (venturi, diaphragm) Determination of Cv of the valves.
- Technical specifications:
- Frame stainless equipped with casters, including two brakes
- A tank in transparent PVC with draining valve
- An industrial stainless body centrifugal pump
- A rotameter
- A membrane valve for controlling the flow
- Two pipe sections with diameters of 20 and 25 mm.
- Two pipe sections with a diameter of 15 mm, smooth and rough
- A piping with variable slope
- Elbows with 45°, 90° large and small ray and 135°
- A widening and an abrupt reduction Dn15-Dn25, in Altuglass
- A membrane valve
- A ball valve
- A cap valve
- A diaphragm in Altuglass
- A Venturi tube in Altuglass
- A device of dye injection
- A manometric panel with single and U-tubes.
- A differential pressure sensor.
- - A control cabinet on/off of the pump and protection
- - A set of manual valves
- - Handbook technical and teaching.
Equipment package:
- - A manometric panel for the measures of the pressure losses in the main system. U-tubes to measure the differential pressures in the diaphragm and the venturi. 4 manometers for the measures of pressures between the valves and a manometric panel.
- - A manometric panel for the measures of the pressure losses in the main system. A differential pressure sensor for pressures measurements in the diaphragm, the venturi and in valves.
- - A differential pressure sensor with display for all the pressures measurements.
Options :
- - Temperature probe and indicator
- - Programmable indicator for calibration of diaphragm and venturi.
quick overview :
Horizontal Fluid Friction Plant
Teaching Objectives of:
Horizontal Fluid Friction Plant- Study of the principal elements in an installation of piping.
- Measurement of pressure losses generated by these various elements by means of manometric panel or/and electronic probe with transmitter.
- Visualization of the flows in the pressure reducing conduits and orifices
- Observation of the modes of laminar flow and turbulent according to the flows and pressures
Study of the regular pressure losses of:
- Piping of various diameters
- Piping smooth and rough
- Piping rising, downward and tilted
Study of the individual pressure losses of:
- Elbows of various angles
- abrupt increase or reduction of the piping diameter
- various valves Calibration of the pressure reducing orifices (venturi, diaphragm) Measurement of the flows by pressure reducing orifices (venturi, diaphragm) Determination of Cv of the valves.
- Technical specifications:
- Frame stainless equipped with casters, including two brakes
- A tank in transparent PVC with draining valve
- An industrial stainless body centrifugal pump
- A rotameter
- A membrane valve for controlling the flow
- Two pipe sections with diameters of 20 and 25 mm.
- Two pipe sections with a diameter of 15 mm, smooth and rough
- A piping with variable slope
- Elbows with 45°, 90° large and small ray and 135°
- A widening and an abrupt reduction Dn15-Dn25, in Altuglass
- A membrane valve
- A ball valve
- A cap valve
- A diaphragm in Altuglass
- A Venturi tube in Altuglass
- A device of dye injection
- A manometric panel with single and U-tubes.
- A differential pressure sensor.
- - A control cabinet on/off of the pump and protection
- - A set of manual valves
- - Handbook technical and teaching.
Equipment package:
- - A manometric panel for the measures of the pressure losses in the main system. U-tubes to measure the differential pressures in the diaphragm and the venturi. 4 manometers for the measures of pressures between the valves and a manometric panel.
- - A manometric panel for the measures of the pressure losses in the main system. A differential pressure sensor for pressures measurements in the diaphragm, the venturi and in valves.
- - A differential pressure sensor with display for all the pressures measurements.
Options :
- - Temperature probe and indicator
- - Programmable indicator for calibration of diaphragm and venturi.
Product
Reviews
add Review
reviews
No Review Yet.
Related
Products
The apparatus consists of converging diverging circular tes...
Impact Of Jet Apparatus It can measure the force generated b...
Losses In Pipe To determine minor flow losses(Fittings) in...
Metacentric Top Equipment Fundamentals of Buoyancy, Metacent...
Notch and Weir Apparatus Notches or Weirs are kept in the p...
Orifice and Mouthpiece Apparatus
Orifice and Mouthpiece Apparatus Both orifices and mouthpiec...
Orifice Meter This equipment is designed to introduce colle...
Pipe Friction Equipment Main Losses In Pipe (Losses Due To...
Copyrights © 2019 All Rights Reserved by Atico
Product
Reviews
add Review
reviews
No Review Yet.