Rotary Vacuum Filter
Categories:Description : The most common types of continuous vacuum filter is the rotary drum filter. A horizontal drum with a slotted face turns at less than 2 RPM in an agitated slurry trough. A filter medium,...
Product
Description
Description :
The most common types of continuous vacuum filter is the rotary drum filter. A horizontal drum with a slotted face turns at less than 2 RPM in an agitated slurry trough. A filter medium, such as canvas, covers the face of drum, which is partly submerged in the liquid. Under the slotted cylindrical face of the main drum is a second, smaller drum with a solid surface. Between the two drums are radial partitions dividing the annular space into separate compartments, each connected by an internal pipe to one hole in the rotating plate of the rotary valve Vacuum and air are alternately applied to each compartment as the drum rotates. The set-up consists of stainless steel drum moving in gunmetal brackets and is divided in 6 compartments, covered by a Stainless Steel mesh. A canvas filter is used for filtration. The whole assembly is fitted with a SS trough in which a agitator is provided. To make the unit a self-contained a slurry mixing and feed arrangement, receiver tanks, vacuum pump, control panel are provided.Experimentation:
- To study the performance of a Rotary Vacuum Filter.
- To study the operation of Rotary Vacuum Filter under vacuum.
- To determine the specific cake resistance and medium resistance.
Utilities Required :
- Electric Supply: Single phase, 220 V AC, 3.5 kW.
- Water supply.
- Drain.
- Slurry required to performing experiment.
Technical Details :
| Filter Drum | : Material Stainless Steel, Dia. 250 mm, Length 350 mm. |
| Mesh | : Material Stainless Steel |
| Filter | : Canvas Cloth |
| No. of Zones | : 6 Nos. |
| Drive for Drum | : FHP motor coupled to a Reduction Gear Box |
| Trough | : Material Stainless Steel, Compatible capacity. |
| Trough Agitator | : Material Stainless Steel, driven by FHP motor with Reduction Gearbox. |
| Slurry Tank | : Stainless Steel, capacity 75 Ltrs. |
| Slurry Pump | : Gear Pump with ½ HP motor |
| Slurry Tank Agitator | : Stainless Steel Impeller with SS Shaft coupled to FHP motor and Reduction Gear Box |
| Filtrate Receiver | : Material Stainless Steel, Capacity 10 Ltrs. (2 Nos.) |
| Vacuum Pump | : Liquid Ring type coupled to a 1 HP Motor |
| Piping | : GI and PVC size ½ |
| Control panel Comprises of Standard make On/Off switch, Mains Indicator etc. | |
| Instruction Manual | : An ENGLISH instruction manual will be provided along with the Apparatus |
| A good quality painted rigid MS Structure is provided to support all the parts. |
quick overview :
Description :
The most common types of continuous vacuum filter is the rotary drum filter. A horizontal drum with a slotted face turns at less than 2 RPM in an agitated slurry trough. A filter medium, such as canvas, covers the face of drum, which is partly submerged in the liquid. Under the slotted cylindrical face of the main drum is a second, smaller drum with a solid surface. Between the two drums are radial partitions dividing the annular space into separate compartments, each connected by an internal pipe to one hole in the rotating plate of the rotary valve Vacuum and air are alternately applied to each compartment as the drum rotates. The set-up consists of stainless steel drum moving in gunmetal brackets and is divided in 6 compartments, covered by a Stainless Steel mesh. A canvas filter is used for filtration. The whole assembly is fitted with a SS trough in which a agitator is provided. To make the unit a self-contained a slurry mixing and feed arrangement, receiver tanks, vacuum pump, control panel are provided.Experimentation:
- To study the performance of a Rotary Vacuum Filter.
- To study the operation of Rotary Vacuum Filter under vacuum.
- To determine the specific cake resistance and medium resistance.
Utilities Required :
- Electric Supply: Single phase, 220 V AC, 3.5 kW.
- Water supply.
- Drain.
- Slurry required to performing experiment.
Technical Details :
| Filter Drum | : Material Stainless Steel, Dia. 250 mm, Length 350 mm. |
| Mesh | : Material Stainless Steel |
| Filter | : Canvas Cloth |
| No. of Zones | : 6 Nos. |
| Drive for Drum | : FHP motor coupled to a Reduction Gear Box |
| Trough | : Material Stainless Steel, Compatible capacity. |
| Trough Agitator | : Material Stainless Steel, driven by FHP motor with Reduction Gearbox. |
| Slurry Tank | : Stainless Steel, capacity 75 Ltrs. |
| Slurry Pump | : Gear Pump with ½ HP motor |
| Slurry Tank Agitator | : Stainless Steel Impeller with SS Shaft coupled to FHP motor and Reduction Gear Box |
| Filtrate Receiver | : Material Stainless Steel, Capacity 10 Ltrs. (2 Nos.) |
| Vacuum Pump | : Liquid Ring type coupled to a 1 HP Motor |
| Piping | : GI and PVC size ½ |
| Control panel Comprises of Standard make On/Off switch, Mains Indicator etc. | |
| Instruction Manual | : An ENGLISH instruction manual will be provided along with the Apparatus |
| A good quality painted rigid MS Structure is provided to support all the parts. |
Product
Reviews
add Review
reviews
No Review Yet.
Related
Products
The apparatus consists of converging diverging circular tes...
Impact Of Jet Apparatus It can measure the force generated b...
Losses In Pipe To determine minor flow losses(Fittings) in...
Metacentric Top Equipment Fundamentals of Buoyancy, Metacent...
Notch and Weir Apparatus Notches or Weirs are kept in the p...
Orifice and Mouthpiece Apparatus
Orifice and Mouthpiece Apparatus Both orifices and mouthpiec...
Orifice Meter This equipment is designed to introduce colle...
Pipe Friction Equipment Main Losses In Pipe (Losses Due To...
Copyrights © 2025 All Rights Reserved by Atico
Product
Reviews
add Review
reviews
No Review Yet.