Water Temperature Control Bench
Categories: Mechanical Lab Equipment ManufacturerWater Temperature Control Bench Description of: Water Temperature Control Bench The operative part permits to heat and to cool a water tank. The electrical cabinet receives the control plate...
Product
Description
Water Temperature Control Bench
Description of:
Water Temperature Control Bench- The operative part permits to heat and to cool a water tank.
- The electrical cabinet receives the control plate wired by the student.
- This system is water self contained and only need a main power supply 230V.
- The bench allows to study, then to wire by the student, a complete temperature control system.
- Following the version of the electrical plate it allow to study.
- Instrumentation (transmitter, thermostat, controller.
- Power modulation (static relay, wave train, dimmer.
- Electric and thermal measurement.
- The bench is conformed to the last securities standards.
Teaching objectives
- Setting and functioning checking.
- Wiring of an heating system.
- Measurement of electric and physical sizes: current, voltage, temperature.
- Control of characteristic sizes of the installation: voltage, current.
- This system can be used for electrical authorization.
- Setting of the loop control parameters.
- After wiring the electrical plate, the student interconnect the electrical plate to the system, then configure and check the good working of the whole control system.
Technical specifications
Operative Part : The bench is made out of an aluminium frame on castors including:- A 25 litres tank.
- A immersed electrical heater.
- A temperature sensor.
- A " low level" sensor.
- A security thermostat.
- A stainless steel centrifugal circulation pump.
- An aero-refrigerant.
- The cooling circuit is made out of a circulation pump and an aero-refrigerant allowing to increase the exchange of calories between the water and the ambient air. It permits to be water self contained. Its purpose is double.
- To disturb the temperature control loop.
- To cool the water tank in order to restart a new experiment (without having to wait for the natural water cooling).
Option : Data acquisition system The data acquisition system is proposed in option. It is made out of a data acquisition card to place into a PC computer and a software functioning under Windows ®. This software allow to visualize the sizes in real time and to record them. The card is linked to the bench by the help of a plug on the front side of the electrical cabinet door.
Dimensions
- 1150 x 670 x 1470 mm
Essential requirements
- Electrical power supply: single phase 230 V+T 16A.
quick overview :
Water Temperature Control Bench
Description of:
Water Temperature Control Bench- The operative part permits to heat and to cool a water tank.
- The electrical cabinet receives the control plate wired by the student.
- This system is water self contained and only need a main power supply 230V.
- The bench allows to study, then to wire by the student, a complete temperature control system.
- Following the version of the electrical plate it allow to study.
- Instrumentation (transmitter, thermostat, controller.
- Power modulation (static relay, wave train, dimmer.
- Electric and thermal measurement.
- The bench is conformed to the last securities standards.
Teaching objectives
- Setting and functioning checking.
- Wiring of an heating system.
- Measurement of electric and physical sizes: current, voltage, temperature.
- Control of characteristic sizes of the installation: voltage, current.
- This system can be used for electrical authorization.
- Setting of the loop control parameters.
- After wiring the electrical plate, the student interconnect the electrical plate to the system, then configure and check the good working of the whole control system.
Technical specifications
Operative Part : The bench is made out of an aluminium frame on castors including:- A 25 litres tank.
- A immersed electrical heater.
- A temperature sensor.
- A " low level" sensor.
- A security thermostat.
- A stainless steel centrifugal circulation pump.
- An aero-refrigerant.
- The cooling circuit is made out of a circulation pump and an aero-refrigerant allowing to increase the exchange of calories between the water and the ambient air. It permits to be water self contained. Its purpose is double.
- To disturb the temperature control loop.
- To cool the water tank in order to restart a new experiment (without having to wait for the natural water cooling).
Option : Data acquisition system The data acquisition system is proposed in option. It is made out of a data acquisition card to place into a PC computer and a software functioning under Windows ®. This software allow to visualize the sizes in real time and to record them. The card is linked to the bench by the help of a plug on the front side of the electrical cabinet door.
Dimensions
- 1150 x 670 x 1470 mm
Essential requirements
- Electrical power supply: single phase 230 V+T 16A.
Product
Reviews
add Review
reviews
No Review Yet.
Related
Products
The apparatus consists of converging diverging circular te...
Impact Of Jet Apparatus It can measure the force generated...
Losses In Pipe To determine minor flow losses(Fittings) i...
Metacentric Top Equipment Fundamentals of Buoyancy, Metacen...
Notch and Weir Apparatus Notches or Weirs are kept in the...
Orifice and Mouthpiece Apparatus
Orifice and Mouthpiece Apparatus Both orifices and mouthpie...
Orifice Meter This equipment is designed to introduce col...
Pipe Friction Equipment Main Losses In Pipe (Losses Due T...
Copyrights © 2019 All Rights Reserved by Atico
Product
Reviews
add Review
reviews
No Review Yet.