Hydraulic Sheet Metal Bender

Categories: Material Lab

Description Maximum bending thickness 4mm Maximum bending width 1320mm Bending angle 120° Maximum lift of the upper beam 110mm Main motor power 4KW Oil pump volume 14L/r Pressure 21Mpa...


title icon
Product

Description

Description

  • Maximum bending thickness 4mm
  • Maximum bending width 1320mm
  • Bending angle 120°
  • Maximum lift of the upper beam 110mm
  • Main motor power 4KW
  • Oil pump volume 14L/r
  • Pressure 21Mpa
Standard
  • Removable Nose Bar
  • Bolted Bottom Bar
  • Compact Hydraulic Power Unit
  • Angle Bar
  • Insert Bar
  • Oil Level Sight Gauge
Electric Foot Switch - Clamps and unclamps Top Leaf. Allows operator mobility when loading and unloading material. Bend Angle Dial Adjustment - Adjustable cam and scale that read in degrees, actuates an electric limit switch for bend angle control and repeatability of bends. Material Thickness Dial Adjustment - Reference scale for speedier set up when adjusting clamping pressure. Back Gauge - 25 1/2" travel, rack and pinion type with hand wheel adjustment on right side of machine. Inch/Cm scales. Inch Control - Bending leaf up/down pushbuttons allow complete operator control of the bending leaf motion. Automatic Cycle - Actuating the "Automatic Pushbutton" clamps the top leaf, raises the bending leaf to the preset bend angle dial adjustment setting, lowers the bending leaf, unclamps the top leaf. Options Available • Insert Bar - 1/4 inch (for closer offset bends) • Radius Formers - for forming gutters, mouldings, and prototypes from thin sheet metal. • Electronic push button operated Back Gauge with digital readout (see directly below).


title icon
Product

Reviews

add Review
reviews

    No Review Yet.

quick overview :

Description

  • Maximum bending thickness 4mm
  • Maximum bending width 1320mm
  • Bending angle 120°
  • Maximum lift of the upper beam 110mm
  • Main motor power 4KW
  • Oil pump volume 14L/r
  • Pressure 21Mpa
Standard
  • Removable Nose Bar
  • Bolted Bottom Bar
  • Compact Hydraulic Power Unit
  • Angle Bar
  • Insert Bar
  • Oil Level Sight Gauge
Electric Foot Switch - Clamps and unclamps Top Leaf. Allows operator mobility when loading and unloading material. Bend Angle Dial Adjustment - Adjustable cam and scale that read in degrees, actuates an electric limit switch for bend angle control and repeatability of bends. Material Thickness Dial Adjustment - Reference scale for speedier set up when adjusting clamping pressure. Back Gauge - 25 1/2" travel, rack and pinion type with hand wheel adjustment on right side of machine. Inch/Cm scales. Inch Control - Bending leaf up/down pushbuttons allow complete operator control of the bending leaf motion. Automatic Cycle - Actuating the "Automatic Pushbutton" clamps the top leaf, raises the bending leaf to the preset bend angle dial adjustment setting, lowers the bending leaf, unclamps the top leaf. Options Available • Insert Bar - 1/4 inch (for closer offset bends) • Radius Formers - for forming gutters, mouldings, and prototypes from thin sheet metal. • Electronic push button operated Back Gauge with digital readout (see directly below).

title icon
Product

Reviews

add Review
reviews

    No Review Yet.