MEC - Cable Forces And Pulley Block
Categories: Engineering Lab EquipmentMEC – Cable Forces And Pulley Blocks Manufacturer and SupplierPulley blocks make it possible to lift heavy loads and are used, for example, with cranes in combination with other accessories of the MEC...
Product
Description
MEC – Cable Forces And Pulley Blocks Manufacturer and Supplier
Pulley blocks make it possible to lift heavy loads and are used, for example, with cranes in combination with other accessories of the MEC Line, enables the smart, digitally supported experimental setup of pulley blocks. The experiment contains two pulley blocks of different designs with smart, communication-enabled suspension cables, equipped with electronic modules for data acquisition and measured value display. The experimental arrangement is set up in the mounting frame. The stainless steel mounting frame provides direct and wireless data transmission and power supply for the smart components.
The pulley blocks have the same transmission ratio and can be investigated simultaneously. The transmission ratio is determined by the number of cable strands and pulleys used. It is possible to configure two setup variants with each pulley block. The force, angle and displacement measurement on the suspension cable has five snap-in points for setting different heights. The click system ensures the components easily snap into place.
Accessories such as supports and vertical loads are available for the setup. Loading is applied to each of the pulley blocks by means of a vertical load on the lower pulley. In experiments, the forces, angles and displacement on the suspension cables are measured and displayed as a measured value both directly on the smart components and in the software. The software identifies and shows the position and location of the installed suspension cables as well as the support reactions. The lifting heights and the vertical loads used are also shown. The software reacts dynamically to changes. The visualisation in the software always corresponds to the actual pulley blocks fitted. The measured values are analysed in real time.
Measurement of suspension cable and support forces in different
of suspension cable and support forces in different
pulley blocks
2 pulley blocks with 2 setup variants each
Smart, communication-enabled suspension cables with electronic
Specification
Measurement of suspension cable and support forces in different pulley blocks
2 pulley blocks with 2 setup variants each
Smart, communication-enabled suspension cables with electronic modules for data acquisition
and measured value display
Setup of the entire experiment arrangement in the se 200 mounting frame
Click system for simple, fast experimental setup without cabling
Supports and vertical loads available as accessories
Automatic identification and assignment of the suspension cables and accessories during setup
and experimentation
Force, angle and displacement measurement with 5 snap-in points
Digital multimedia teaching material online in the science Media Center: E-Learning course, worksheets
Technical Data
Pulley blocks:
Transmission ratio: 1:4
Attachment points for suspension cable: 2
snap-in points: 5
spacing of snap-in points: 33mm
Measuring ranges
2x force measurement: 0…200N
2x angle: 0…360°
2x snap-in points: 5
quick overview :
MEC – Cable Forces And Pulley Blocks Manufacturer and Supplier
Pulley blocks make it possible to lift heavy loads and are used, for example, with cranes in combination with other accessories of the MEC Line, enables the smart, digitally supported experimental setup of pulley blocks. The experiment contains two pulley blocks of different designs with smart, communication-enabled suspension cables, equipped with electronic modules for data acquisition and measured value display. The experimental arrangement is set up in the mounting frame. The stainless steel mounting frame provides direct and wireless data transmission and power supply for the smart components.
The pulley blocks have the same transmission ratio and can be investigated simultaneously. The transmission ratio is determined by the number of cable strands and pulleys used. It is possible to configure two setup variants with each pulley block. The force, angle and displacement measurement on the suspension cable has five snap-in points for setting different heights. The click system ensures the components easily snap into place.
Accessories such as supports and vertical loads are available for the setup. Loading is applied to each of the pulley blocks by means of a vertical load on the lower pulley. In experiments, the forces, angles and displacement on the suspension cables are measured and displayed as a measured value both directly on the smart components and in the software. The software identifies and shows the position and location of the installed suspension cables as well as the support reactions. The lifting heights and the vertical loads used are also shown. The software reacts dynamically to changes. The visualisation in the software always corresponds to the actual pulley blocks fitted. The measured values are analysed in real time.
Measurement of suspension cable and support forces in different
of suspension cable and support forces in different
pulley blocks
2 pulley blocks with 2 setup variants each
Smart, communication-enabled suspension cables with electronic
Specification
Measurement of suspension cable and support forces in different pulley blocks
2 pulley blocks with 2 setup variants each
Smart, communication-enabled suspension cables with electronic modules for data acquisition
and measured value display
Setup of the entire experiment arrangement in the se 200 mounting frame
Click system for simple, fast experimental setup without cabling
Supports and vertical loads available as accessories
Automatic identification and assignment of the suspension cables and accessories during setup
and experimentation
Force, angle and displacement measurement with 5 snap-in points
Digital multimedia teaching material online in the science Media Center: E-Learning course, worksheets
Technical Data
Pulley blocks:
Transmission ratio: 1:4
Attachment points for suspension cable: 2
snap-in points: 5
spacing of snap-in points: 33mm
Measuring ranges
2x force measurement: 0…200N
2x angle: 0…360°
2x snap-in points: 5
Product
Reviews
add Review
reviews
No Review Yet.
Related
Products
Fuel Supply System Of Petrol Engine
Fuel is supplied under pressure or under gravity. It consist...
It is an open type instructional apparatus with second hand...
Distributor is connected to camshaft and cam shaft is connec...
The device is consisting of the front able with wheel &b...
Specification: 1. Experimental setup to demonstrate sim...
Technical Description: Supplementary set extends the scop...
Equilibrium Single Plane, Statically Det...
Equilibrium in a Single Plane, Statically Determinate S...
Equilibrium Of Moments On Pulleys
Equilibrium Of Moments On Pulleys Manufacturer and Supplier...
Copyrights © 2019 All Rights Reserved by Atico
Product
Reviews
add Review
reviews
No Review Yet.