quick overview :
The Pelton turbine is a type of free-jet resp. impulse turbine which convert the pressure energy of water into kinetic energy entirely in the distributor. Pelton turbines are used at large heads and relatively low flow rates. The turbine power is adjusted by means of the nozzle cross-section. In practice, Pelton turbines are used for driving synchronous generators, where they run at constant speed.
The Pelton turbine is an accessory for the trainer. The experimental unit consists of the Pelton wheel, a needle nozzle used as distributor, a band brake for loading the turbine and a housing with a transparent front panel. The transparent cover enables you to observe the water flow, the Pelton wheel and the nozzle during operation. You can change the nozzle cross-section and thus the flow rate by adjusting the nozzle needle.
Learning Objectives/Experiments
Determination of mechanical output
Determination of efficiency
Recording of characteristic curves
Investigation of the influence of the nozzle cross-section on the power output
Specification
Recording the curves of a Pelton turbine and investigating the influence of the nozzle cross-section
Transparent front panel for observing the operating area
Loading the turbine by use of a band brake
Adjustable nozzle needle for setting different nozzle cross-sections
Non-contact speed measurement at the turbine shaft and force sensor at the brake for measuring the torque
Force sensor at the turbine inlet
Speed, torque and pressure displayed on the switch cabinet
Water supply, flow rate measurement and data processing software
Technical data
Turbine
output: approx. 350W at 1000min -1, 150L/min, H=20m
max. speed: 1500min-1
Pelton wheel
14 blades
medium diameter: 165mm
Measuring ranges
torque: 0…9,81Nm
pressure: 0…4bar abs.
speed: 0…4000min-1
Product
Reviews
add Review
reviews
No Review Yet.