PLC Process Trainer
Categories: Mechanical Lab Equipment ManufacturerPLC Process Trainer Teaching Objectives of PLC Process Trainer To study automated control system associated to the hydraulic facilities (pump speed driving, level measurement, vessel draining, v...
Product
Description
PLC Process Trainer
Teaching Objectives of PLC Process Trainer- To study automated control system associated to the hydraulic facilities (pump speed driving, level measurement, vessel draining, vessel stirring).
- Identification of the sensors, actuators, process to control, signals processing.
- Writing of a GRAFCET program.
- Permits more other to study a control loop with the introduction of an analogical measurement and an analogical action.
- To calibrate an analogical sensor and to study its linearity.
- PID single variable control loop (pH).
- Measurement of the input/output of the controller.
- Identification of the components (controller, actuator, sensor, process).
- Definition of the variables.
- Set point.
- Measure.
- gap variable.
- Adjusting size.
- Controlled size.
- Disruptive size.
- Algorithm Control (ON/OFF, PID).
Technical specifications
- The system is made up of a mixing stirred vessel feed by two other vessels. Each vessel is equipped with an electric draining valve, a manual draining valve and a low level probe. The mixing stirred vessel is equipped with an additional high level probe.
- This table top bench is made up of a stainless steel frame mounted on 4 feet with a PVC panel.
- 3 vessels
- 3 solenoid valves
- 4 level detectors
- A stirrer (motor and propeller)
- A control cabinet including :
- 1 section switch with lock
- 1 emergency stop button
- 1 rearmament button, 1 ON light , 1 start button and 1 cycle stop, 4 switches, the PLC wiring terminals
- The control and the stirrer safety device
- 1 transformer 24V, relay, solenoid valve, 1 contactor,1 DC power supply 24V for the PLC.
- It is made up of the same components with the bellow additional components:
- A pH control loop managed by the PID function of thePLC. It is made up of :
- A pH probe measurement
- A transmitter pH/I (4-20 mA),
- A peristaltic pump in 110V, with speed driver
- A feeding vat of the acid or the base
- Bench is proposed with two optional PLC:
- 1 PLC Schneider.
- 1 PLC Schneider Micro.
Bench is proposed with two optional PLC:
Option 1- 1 PLC Schneider TWIDO.
- 1 digital control screen “Magelis” for the communication man / Machine.
- 1 PLC Schneider Micro.
- 1 digital control screen “Magelis” for the communication man / Machine.
Essential requirements (Dimensions (L x w x h)
- 1000 x 400 x 1200 mm
- 1200 x 600 x 950 mm
Power supply :
- 220 V mono, 0, 15 kW
- 220 V mono, 0, 3 Kw
quick overview :
PLC Process Trainer
Teaching Objectives of PLC Process Trainer- To study automated control system associated to the hydraulic facilities (pump speed driving, level measurement, vessel draining, vessel stirring).
- Identification of the sensors, actuators, process to control, signals processing.
- Writing of a GRAFCET program.
- Permits more other to study a control loop with the introduction of an analogical measurement and an analogical action.
- To calibrate an analogical sensor and to study its linearity.
- PID single variable control loop (pH).
- Measurement of the input/output of the controller.
- Identification of the components (controller, actuator, sensor, process).
- Definition of the variables.
- Set point.
- Measure.
- gap variable.
- Adjusting size.
- Controlled size.
- Disruptive size.
- Algorithm Control (ON/OFF, PID).
Technical specifications
- The system is made up of a mixing stirred vessel feed by two other vessels. Each vessel is equipped with an electric draining valve, a manual draining valve and a low level probe. The mixing stirred vessel is equipped with an additional high level probe.
- This table top bench is made up of a stainless steel frame mounted on 4 feet with a PVC panel.
- 3 vessels
- 3 solenoid valves
- 4 level detectors
- A stirrer (motor and propeller)
- A control cabinet including :
- 1 section switch with lock
- 1 emergency stop button
- 1 rearmament button, 1 ON light , 1 start button and 1 cycle stop, 4 switches, the PLC wiring terminals
- The control and the stirrer safety device
- 1 transformer 24V, relay, solenoid valve, 1 contactor,1 DC power supply 24V for the PLC.
- It is made up of the same components with the bellow additional components:
- A pH control loop managed by the PID function of thePLC. It is made up of :
- A pH probe measurement
- A transmitter pH/I (4-20 mA),
- A peristaltic pump in 110V, with speed driver
- A feeding vat of the acid or the base
- Bench is proposed with two optional PLC:
- 1 PLC Schneider.
- 1 PLC Schneider Micro.
Bench is proposed with two optional PLC:
Option 1- 1 PLC Schneider TWIDO.
- 1 digital control screen “Magelis” for the communication man / Machine.
- 1 PLC Schneider Micro.
- 1 digital control screen “Magelis” for the communication man / Machine.
Essential requirements (Dimensions (L x w x h)
- 1000 x 400 x 1200 mm
- 1200 x 600 x 950 mm
Power supply :
- 220 V mono, 0, 15 kW
- 220 V mono, 0, 3 Kw
Product
Reviews
add Review
reviews
No Review Yet.
Related
Products
The apparatus consists of converging diverging circular te...
Impact Of Jet Apparatus It can measure the force generated...
Losses In Pipe To determine minor flow losses(Fittings) i...
Metacentric Top Equipment Fundamentals of Buoyancy, Metacen...
Notch and Weir Apparatus Notches or Weirs are kept in the...
Orifice and Mouthpiece Apparatus
Orifice and Mouthpiece Apparatus Both orifices and mouthpie...
Orifice Meter This equipment is designed to introduce col...
Pipe Friction Equipment Main Losses In Pipe (Losses Due T...
Copyrights © 2019 All Rights Reserved by Atico
Product
Reviews
add Review
reviews
No Review Yet.