Pressure Losses Pilot Plant (Large Line)
Categories: Chemical Engineering Manufacturer and SupplierThis equipment consists of a hydraulic circuit including pump and flowmeter and enabling to be connected with various hydraulic components, where the pressure drops on these elements can be measured....
Product
Description
This equipment consists of a hydraulic circuit including pump and flowmeter and enabling to be connected with various hydraulic components, where the pressure drops on these elements can be measured. The automated version includes a PID controller for the automatic control of the flow rate of the water crossing the circuit.
TRAINING PROGRAM
This unit enables to deepen the following issues:
• Determining pressure drops in pipes of different diameter
• Determining pressure drops in bends and elbows
• Determining pressure drops in pipe expansions and restrictions
• Measuring the flow rate with calibrated orifice and computing the discharge coefficient α
• Measuring the flow rate with Venturi tube and computing the discharge coefficient α
• Checking the laminar, transition and turbulent flows by tracer
• Verifying Bernoulli’s theorem
TECHNICAL SPECIFICATIONS:
• Framework of AISI 304 stainless steel with castors
• Centrifugal pump with body and impeller of bronze, Qmax = 10 m3/h, H = 18 m
• Tank of AISI 304 stainless steel, with capacity of 80 l
• Variable area flowmeter of AISI 304 stainless steel, with range of 1 to 10 m3/h
• Angle valve (DN 25) of borosilicate glass, with plug of PTFE
• Diaphragm valve of borosilicate glass - DN 25
• Pipe of AISI 304 stainless steel of ½”
• Pipe of AISI 304 stainless steel of 1”
• Pipe of borosilicate glass DN15
• Pipe of borosilicate glass DN25
• Pipe of AISI 304 stainless steel with U and L bends
• Pipe of AISI 304 stainless steel with sudden expansion and restriction
• Pipe of AISI 304 stainless steel with calibrated orifice
• Pipe of AISI 304 stainless steel with Venturi tube of Plexiglas
• Pipe of borosilicate glass for checking the laminar and turbulent flows by tracer
• Tank of borosilicate glass, with capacity of 1 l, for tracer
• Bourdon gauge of AISI 304 stainless steel
• Stainless steel differential mercury gauge (mercury not supplied; the instrument can be replaced with a digital pressure gauge on request during order placement)
• Thermometer with range of 0 to 100 °C
• Piping and valves of AISI 304 and AISI 316 stainless steel
• Switchboard IP55, complying with EC conformity mark, including plant synoptic and ELCB
• Emergency button
• Power supply: 230 Vac 50 Hz single-phase - 2 kVA (Other voltage and frequency on request)
Besides being provided with all the characteristics, this model also includes the following additional items:
• Electronic differential pressure transmitter of AISI 316 stainless steel, range of 0 to 10000 mm H2O and 4-20 mA output signal
• Thermo-resistance Pt 100 with sheath of AISI 316 stainless steel
• Interface (included in the switchboard) for the connection with a PC
• Data acquisition software for Windows
Besides being provided with all the characteristics, this model also includes the following additional items:
• Pneumatic valve of stainless steel
• Electronic differential pressure transmitter of AISI 316 stainless stee, range of 0 to 1000 mm H2O and 4-20 mA output signal
• Electronic differential pressure transmitter of stainless steel, range of 0 to 10000 mm H2O and 4-20 mA output signal
• Thermo-resistance Pt 100 with sheath of AISI 316 stainless steel
• Microprocessor digital PID controller with serial card
• Supervision software for Windows: it enables to control ON-OFF signals, analog signals coming from PID controller, real-time trend and historical trend
quick overview :
This equipment consists of a hydraulic circuit including pump and flowmeter and enabling to be connected with various hydraulic components, where the pressure drops on these elements can be measured. The automated version includes a PID controller for the automatic control of the flow rate of the water crossing the circuit.
TRAINING PROGRAM
This unit enables to deepen the following issues:
• Determining pressure drops in pipes of different diameter
• Determining pressure drops in bends and elbows
• Determining pressure drops in pipe expansions and restrictions
• Measuring the flow rate with calibrated orifice and computing the discharge coefficient α
• Measuring the flow rate with Venturi tube and computing the discharge coefficient α
• Checking the laminar, transition and turbulent flows by tracer
• Verifying Bernoulli’s theorem
TECHNICAL SPECIFICATIONS:
• Framework of AISI 304 stainless steel with castors
• Centrifugal pump with body and impeller of bronze, Qmax = 10 m3/h, H = 18 m
• Tank of AISI 304 stainless steel, with capacity of 80 l
• Variable area flowmeter of AISI 304 stainless steel, with range of 1 to 10 m3/h
• Angle valve (DN 25) of borosilicate glass, with plug of PTFE
• Diaphragm valve of borosilicate glass - DN 25
• Pipe of AISI 304 stainless steel of ½”
• Pipe of AISI 304 stainless steel of 1”
• Pipe of borosilicate glass DN15
• Pipe of borosilicate glass DN25
• Pipe of AISI 304 stainless steel with U and L bends
• Pipe of AISI 304 stainless steel with sudden expansion and restriction
• Pipe of AISI 304 stainless steel with calibrated orifice
• Pipe of AISI 304 stainless steel with Venturi tube of Plexiglas
• Pipe of borosilicate glass for checking the laminar and turbulent flows by tracer
• Tank of borosilicate glass, with capacity of 1 l, for tracer
• Bourdon gauge of AISI 304 stainless steel
• Stainless steel differential mercury gauge (mercury not supplied; the instrument can be replaced with a digital pressure gauge on request during order placement)
• Thermometer with range of 0 to 100 °C
• Piping and valves of AISI 304 and AISI 316 stainless steel
• Switchboard IP55, complying with EC conformity mark, including plant synoptic and ELCB
• Emergency button
• Power supply: 230 Vac 50 Hz single-phase - 2 kVA (Other voltage and frequency on request)
Besides being provided with all the characteristics, this model also includes the following additional items:
• Electronic differential pressure transmitter of AISI 316 stainless steel, range of 0 to 10000 mm H2O and 4-20 mA output signal
• Thermo-resistance Pt 100 with sheath of AISI 316 stainless steel
• Interface (included in the switchboard) for the connection with a PC
• Data acquisition software for Windows
Besides being provided with all the characteristics, this model also includes the following additional items:
• Pneumatic valve of stainless steel
• Electronic differential pressure transmitter of AISI 316 stainless stee, range of 0 to 1000 mm H2O and 4-20 mA output signal
• Electronic differential pressure transmitter of stainless steel, range of 0 to 10000 mm H2O and 4-20 mA output signal
• Thermo-resistance Pt 100 with sheath of AISI 316 stainless steel
• Microprocessor digital PID controller with serial card
• Supervision software for Windows: it enables to control ON-OFF signals, analog signals coming from PID controller, real-time trend and historical trend
Product
Reviews
add Review
reviews
No Review Yet.
Related
Products
4 WAY LABORATORY TEST TUBE RACK
4 Way Laboratory Test Tube Rack4 Way Laboratory Test Tube...
Absorption and Stripping Pilot Plant (La...
This absorption and stripping system enables to study the ma...
Absorption Pilot Plant (Medium Line)
This absorption unit has been designed to explain the princi...
Apparatus for the Study of Ternary Syste...
This equipment enables to study the balances of ternary liqu...
The unit is composed by an axial fan mounted on a stainless...
Batch Distillation Pilot Plant (Large Li...
The distillation column is completely made of glass and it c...
Batch Distillation Pilot Plant (Medium L...
The distillation column is made completely of glass and it c...
Batch Distillation Pilot Plant
This distillation column is completely of glass and it consi...
Copyrights © 2019 All Rights Reserved by Atico
Product
Reviews
add Review
reviews
No Review Yet.