Piece Distribution Module
Categories: Automation TechnologiesThe distribution module allows the distribution of pieces from a store to the subsequent working stations. The cylindrical pieces of different material fall down by gravity on a special support base....
Product
Description
The distribution module allows the distribution of pieces from a store to the subsequent working stations. The cylindrical pieces of different material fall down by gravity on a special support base. A cylinder expels them from the store to an appropriate work area. The presence of the piece in this area is detected by a microswitch. The pieces presence / absence in the cylindrical store is detected by an optical sensor. The module, as a whole, is assembled on a aluminium section bar structure easily transportable inside the
laboratory. The complete control of the module is carried out by a PLC (optional) linked to the system through an I/O interface box.
The PLC programming software allows the development of a wide set of automation experiences with the module, working in an integrated cycle or in a stand alone mode. Finally, the module supervision is carried out with the software.
TRAINING PROGRAM:
The training program that can be developed with the module includes:
• Principles of electro-pneumatics
• Operation of the double effect pneumatic cylinder
• Operation of a 5/2 ways bistable electrovalve
• Study of the positioning systems
TECHNICAL SPECIFICATIONS:
Modular unit assembled on a aluminium section bar structure. It includes I/O interface box with:
• Ø = 2 mm terminals
• Cable with 25-pole D-SUB plug connector
Besides performing the function of control board for the module, this interface box also enables the students to carry out electrical measurements on the components of the module. The control of the module is possible through the follow PLC training panels (not supplied):
• PLC training panels: manages the module through Ø = 2 mm terminals. In case one of these two panels is used, a 24 Vdc power supply is already mounted on board.
Sensors and actuators:
• 1 Micro-switch
• 2 REED sensors
• 1 Optical sensor
• 1 5/2 bistable electrovalve
Station inputs and outputs:
• 4 Digital inputs
• 2 Digital outputs
quick overview :
The distribution module allows the distribution of pieces from a store to the subsequent working stations. The cylindrical pieces of different material fall down by gravity on a special support base. A cylinder expels them from the store to an appropriate work area. The presence of the piece in this area is detected by a microswitch. The pieces presence / absence in the cylindrical store is detected by an optical sensor. The module, as a whole, is assembled on a aluminium section bar structure easily transportable inside the
laboratory. The complete control of the module is carried out by a PLC (optional) linked to the system through an I/O interface box.
The PLC programming software allows the development of a wide set of automation experiences with the module, working in an integrated cycle or in a stand alone mode. Finally, the module supervision is carried out with the software.
TRAINING PROGRAM:
The training program that can be developed with the module includes:
• Principles of electro-pneumatics
• Operation of the double effect pneumatic cylinder
• Operation of a 5/2 ways bistable electrovalve
• Study of the positioning systems
TECHNICAL SPECIFICATIONS:
Modular unit assembled on a aluminium section bar structure. It includes I/O interface box with:
• Ø = 2 mm terminals
• Cable with 25-pole D-SUB plug connector
Besides performing the function of control board for the module, this interface box also enables the students to carry out electrical measurements on the components of the module. The control of the module is possible through the follow PLC training panels (not supplied):
• PLC training panels: manages the module through Ø = 2 mm terminals. In case one of these two panels is used, a 24 Vdc power supply is already mounted on board.
Sensors and actuators:
• 1 Micro-switch
• 2 REED sensors
• 1 Optical sensor
• 1 5/2 bistable electrovalve
Station inputs and outputs:
• 4 Digital inputs
• 2 Digital outputs
Product
Reviews
add Review
reviews
No Review Yet.
Related
Products
The unit is a tabletop structure reproducing a 3-floor lift....
Advanced Electro-Pneumatics Kit
This advanced pneumatics kit is supplied only as an extensio...
This Advanced pneumatics kit is supplied only as an extensio...
Artificial Colour Vision System
System, included in a laboratory of automation technologies...
Automatic Multilevel Storage for Product...
The mechatronic system consists of the following elements:•...
Automatic Multistation Line for Samples...
The mechatronic system consists of the following elements:•...
Automatic Pieces identification and Sele...
The mechatronic system consists of the following elements:•...
Automatic Pieces Identification, Thickne...
The mechatronic system consists of the following elements:•...
Copyrights © 2019 All Rights Reserved by Atico
Product
Reviews
add Review
reviews
No Review Yet.