Pieces Thickness Measurement Module
Categories: Automation TechnologiesThe measurement module allows to discriminate the pieces depending on their thickness. The measurement is carried out by a sensor whose output voltage is an analog signal between 0-10 V. The piece is...
Product
Description
The measurement module allows to discriminate the pieces depending on their thickness. The measurement is carried out by a sensor whose output voltage is an analog signal between 0-10 V. The piece is lead up by a trolley and pushed against the sensor in order to determine the thickness. The result of the test is then applied during the descent of the trolley. When the piece fits the pre-set parameters, it is released in the first slide, otherwise it is “rejected” and discharged in the second slide. The module, as a whole, is assembled on a aluminium section bar structure easily transportable inside the laboratory. The complete control of the module is carried out by a PLC (optional) linked to the system through an I/O interface box. The PLC programming software allows the development of a wide set of automation experiences with the module, working in an integrated cycle or in a stand alone mode.
Finally, the module supervision is carried out with the software
TRAINING PROGRAM:
The training program that can be developed with the module, includes:
• Principles of electro-pneumatics
• Study of piece selection methods
• Operation of the electrovalves
• Operation of the “REED” sensors
• Operation of a double effect cylinder
• Operation of a no stem cylinder
TECHNICAL SPECIFICATIONS:
Modular unit assembled on a aluminium section bar structure. It includes I/O interface box with:
• Ø = 2 mm terminals
• Cable with 25-pole D-SUB plug connector
Besides performing the function of control board for the module, this interface box also enables the students to carry out electrical measurements on the components of the module The control of the module is possible through the follow PLC training panels (not supplied):
• PLC training panels: manages the module through Ø = 2 mm terminals. In case one of these two panels is used, a 24 Vdc power supply is already mounted on board.
Sensors and actuators:
• 1 Linear potentiometer sensor
• 3 REED sensors
• 1 5/2 monostable electrovalve
• 1 5/3 electrovalve
Station inputs and outputs:
• 4 Digital inputs
• 3 Digital outputs
• 1 Analogic outputs
quick overview :
The measurement module allows to discriminate the pieces depending on their thickness. The measurement is carried out by a sensor whose output voltage is an analog signal between 0-10 V. The piece is lead up by a trolley and pushed against the sensor in order to determine the thickness. The result of the test is then applied during the descent of the trolley. When the piece fits the pre-set parameters, it is released in the first slide, otherwise it is “rejected” and discharged in the second slide. The module, as a whole, is assembled on a aluminium section bar structure easily transportable inside the laboratory. The complete control of the module is carried out by a PLC (optional) linked to the system through an I/O interface box. The PLC programming software allows the development of a wide set of automation experiences with the module, working in an integrated cycle or in a stand alone mode.
Finally, the module supervision is carried out with the software
TRAINING PROGRAM:
The training program that can be developed with the module, includes:
• Principles of electro-pneumatics
• Study of piece selection methods
• Operation of the electrovalves
• Operation of the “REED” sensors
• Operation of a double effect cylinder
• Operation of a no stem cylinder
TECHNICAL SPECIFICATIONS:
Modular unit assembled on a aluminium section bar structure. It includes I/O interface box with:
• Ø = 2 mm terminals
• Cable with 25-pole D-SUB plug connector
Besides performing the function of control board for the module, this interface box also enables the students to carry out electrical measurements on the components of the module The control of the module is possible through the follow PLC training panels (not supplied):
• PLC training panels: manages the module through Ø = 2 mm terminals. In case one of these two panels is used, a 24 Vdc power supply is already mounted on board.
Sensors and actuators:
• 1 Linear potentiometer sensor
• 3 REED sensors
• 1 5/2 monostable electrovalve
• 1 5/3 electrovalve
Station inputs and outputs:
• 4 Digital inputs
• 3 Digital outputs
• 1 Analogic outputs
Product
Reviews
add Review
reviews
No Review Yet.
Related
Products
The unit is a tabletop structure reproducing a 3-floor lift....
Advanced Electro-Pneumatics Kit
This advanced pneumatics kit is supplied only as an extensio...
This Advanced pneumatics kit is supplied only as an extensio...
Artificial Colour Vision System
System, included in a laboratory of automation technologies...
Automatic Multilevel Storage for Product...
The mechatronic system consists of the following elements:•...
Automatic Multistation Line for Samples...
The mechatronic system consists of the following elements:•...
Automatic Pieces identification and Sele...
The mechatronic system consists of the following elements:•...
Automatic Pieces Identification, Thickne...
The mechatronic system consists of the following elements:•...
Copyrights © 2019 All Rights Reserved by Atico
Product
Reviews
add Review
reviews
No Review Yet.