Pressure Control

Categories: Automation Technologies

This bench top enables to carry out several tests of pressure control. The pressure supplied by the laboratory network of compressed air, is measured by a pressure transmitter and it is controlled by...


title icon
Product

Description

This bench top enables to carry out several tests of pressure control. The pressure supplied by the laboratory network of compressed air, is measured by a pressure transmitter and it is controlled by a pneumatic valve inserted in inlet line; a tank can be inserted in the circuit to vary the system volume. The on-board PLC includes a PID algorithm block and is able to manage the unit through an Ethernet communications module. This module allows the PLC to work together with an operator panel for the information exchange. The panel has several graphic pages, with the unit synoptic diagram, the open and closed control loop main parameters, and the graphic of the system response according to the working situations.

TRAINING PROGRAM:
This unit enables to develop and analyze the following subjects:
• Proportional, Integral and Derivative control
• Open-loop control
• Closed-loop control
• Tuning a controller
• Response to a noise

TECHNICAL SPECIFICATIONS:
• Framework of AISI 304 stainless steel
• Pneumatic control valve of AISI 316 stainless steel, Cv = 2.5
• Electronic pressure transmitter of stainless steel with range of 0 to 6 bar
• Bourdon gauge of stainless steel with range of 0 to 6 bar
• Electro-pneumatic converter, 4 to 20 mA / 0.2 to 1 bar
• Piping and valves of AISI 304 and 316 stainless steel
• Pressure gauge for measuring the output signal of I/P converter
• Switchboard of painted carbon steel with synoptic, ELCB and measuring terminals for input and output signals of the controller
• This unit can be connected with module, for the simultaneous control of pressure and flow rate
• Pipes and valves of AISI 304 and 316 stainless steel
• Industrial PLC placed in the electrical board, including the PID control block and Ethernet communications module. It is included the standard programming software.
• Operator Panel, 7” TFT touchscreen display, 16 million colors, 800 x 480 pixels, with RJ45 PROFINET ports; the H.M.I (Human Machine Interface) industrial supervision software is included.
• Power Supply: 230 Vac 50 Hz single-phase - 0,5 kVA (Other voltage and frequency on request)


title icon
Product

Reviews

add Review
reviews

    No Review Yet.

quick overview :

This bench top enables to carry out several tests of pressure control. The pressure supplied by the laboratory network of compressed air, is measured by a pressure transmitter and it is controlled by a pneumatic valve inserted in inlet line; a tank can be inserted in the circuit to vary the system volume. The on-board PLC includes a PID algorithm block and is able to manage the unit through an Ethernet communications module. This module allows the PLC to work together with an operator panel for the information exchange. The panel has several graphic pages, with the unit synoptic diagram, the open and closed control loop main parameters, and the graphic of the system response according to the working situations.

TRAINING PROGRAM:
This unit enables to develop and analyze the following subjects:
• Proportional, Integral and Derivative control
• Open-loop control
• Closed-loop control
• Tuning a controller
• Response to a noise

TECHNICAL SPECIFICATIONS:
• Framework of AISI 304 stainless steel
• Pneumatic control valve of AISI 316 stainless steel, Cv = 2.5
• Electronic pressure transmitter of stainless steel with range of 0 to 6 bar
• Bourdon gauge of stainless steel with range of 0 to 6 bar
• Electro-pneumatic converter, 4 to 20 mA / 0.2 to 1 bar
• Piping and valves of AISI 304 and 316 stainless steel
• Pressure gauge for measuring the output signal of I/P converter
• Switchboard of painted carbon steel with synoptic, ELCB and measuring terminals for input and output signals of the controller
• This unit can be connected with module, for the simultaneous control of pressure and flow rate
• Pipes and valves of AISI 304 and 316 stainless steel
• Industrial PLC placed in the electrical board, including the PID control block and Ethernet communications module. It is included the standard programming software.
• Operator Panel, 7” TFT touchscreen display, 16 million colors, 800 x 480 pixels, with RJ45 PROFINET ports; the H.M.I (Human Machine Interface) industrial supervision software is included.
• Power Supply: 230 Vac 50 Hz single-phase - 0,5 kVA (Other voltage and frequency on request)

title icon
Product

Reviews

add Review
reviews

    No Review Yet.