Rotating Storage Module
Categories: Automation TechnologiesThe module allows to store the pieces in three different positions. The pieces movement is carried out by a rotative system with a suction cap. The pieces are then moved among the three preset transpa...
Product
Description
The module allows to store the pieces in three different positions. The pieces movement is carried out by a rotative system with a suction cap. The pieces are then moved among the three preset transparent cylinders for unloading. Four microswitches set the right position for the pieces loading/unloading, while a sensor on the pneumatic cylinder checks the stroke. The cylinder movement and the vacuum required by the suction cap are controlled by electrovalves. The module, as a whole, is assembled on a aluminium section bar structure easily transportable inside the laboratory. The complete control of the module is carried out by a PLC (optional) linked to the system through an I/O interface box. The PLC programming software allows the development of a wide set of automation experiences with the module, working in an integrated cycle or in a stand alone mode. Finally, the module supervision is carried out
with the software.
TRAINING PROGRAM:
The training program that can be developed with the module includes:
• Principles of electro-pneumatics
• Study of the storage systems
• Operation of the sensors
• Operation of the electro-valves
TECHNICAL SPECIFICATIONS:
Modular unit assembled on a aluminium section bar structure. It includes I/O interface box with:
• Ø = 2 mm terminals
• Cable with 25-pole D-SUB plug connector
Besides performing the function of control board for the module, this interface box also enables the students to carry out electrical measurements on the components of the module. The control of the module is possible through the follow PLC training panels (not supplied):
• PLC training panels: manages the module through Ø = 2 mm terminals. In case one of these two panels is used, a 24 Vdc power supply is already mounted on board.
Sensors and actuators:
• 4 Micro switches
• 1 REED sensor
• 1 DC motor 24 Vdc
• 2 5/2 monostable electro-valves
Station inputs and outputs:
• 5 Digital inputs
• 4 Digital outputs
quick overview :
The module allows to store the pieces in three different positions. The pieces movement is carried out by a rotative system with a suction cap. The pieces are then moved among the three preset transparent cylinders for unloading. Four microswitches set the right position for the pieces loading/unloading, while a sensor on the pneumatic cylinder checks the stroke. The cylinder movement and the vacuum required by the suction cap are controlled by electrovalves. The module, as a whole, is assembled on a aluminium section bar structure easily transportable inside the laboratory. The complete control of the module is carried out by a PLC (optional) linked to the system through an I/O interface box. The PLC programming software allows the development of a wide set of automation experiences with the module, working in an integrated cycle or in a stand alone mode. Finally, the module supervision is carried out
with the software.
TRAINING PROGRAM:
The training program that can be developed with the module includes:
• Principles of electro-pneumatics
• Study of the storage systems
• Operation of the sensors
• Operation of the electro-valves
TECHNICAL SPECIFICATIONS:
Modular unit assembled on a aluminium section bar structure. It includes I/O interface box with:
• Ø = 2 mm terminals
• Cable with 25-pole D-SUB plug connector
Besides performing the function of control board for the module, this interface box also enables the students to carry out electrical measurements on the components of the module. The control of the module is possible through the follow PLC training panels (not supplied):
• PLC training panels: manages the module through Ø = 2 mm terminals. In case one of these two panels is used, a 24 Vdc power supply is already mounted on board.
Sensors and actuators:
• 4 Micro switches
• 1 REED sensor
• 1 DC motor 24 Vdc
• 2 5/2 monostable electro-valves
Station inputs and outputs:
• 5 Digital inputs
• 4 Digital outputs
Product
Reviews
add Review
reviews
No Review Yet.
Related
Products
The unit is a tabletop structure reproducing a 3-floor lift....
Advanced Electro-Pneumatics Kit
This advanced pneumatics kit is supplied only as an extensio...
This Advanced pneumatics kit is supplied only as an extensio...
Artificial Colour Vision System
System, included in a laboratory of automation technologies...
Automatic Multilevel Storage for Product...
The mechatronic system consists of the following elements:•...
Automatic Multistation Line for Samples...
The mechatronic system consists of the following elements:•...
Automatic Pieces identification and Sele...
The mechatronic system consists of the following elements:•...
Automatic Pieces Identification, Thickne...
The mechatronic system consists of the following elements:•...
Copyrights © 2019 All Rights Reserved by Atico
Product
Reviews
add Review
reviews
No Review Yet.