Simulated Service Testing for Engine Coolant Tester
Categories: Petroleum Testing EquipmentThe sample will be cycled for 1064 hours in a closed system consisting of a reservoir, a water pump, a radiator and a rubber tube at a certain temperature and flow rate. Its corrosion resistance is...
Product
Description
The sample will be cycled
for 1064 hours in a closed system consisting of a reservoir, a water pump, a
radiator and a rubber tube at a certain temperature and flow rate. Its
corrosion resistance is determined by the weight loss of typical metal test
pieces used by the engine cooling system in the reservoir and the state of the
inner surface of each component. The variation in the performance of the sample
is determined by the periodic analysis of the sample taken from the system
during the test cycle. The simulated service tester is suitable for engine
coolant concentration and engine coolant.
Technical Parameters:
1. Applicable standards of simulated service
tester: ASTM D2570, SH/T0088
2. Liquid flow: 1.3 -1.6 l/s
3. Heating method: winding heating belt
4. Working time: 1064 hours
5. Temperature control mode: digital PID thermostat
6. Total power: 3.5KW
7. Temperature control range: 88±2℃
8. Timing mode: by digital display timer
9. Working pressure: 80 ~ 103kpa pressure gauge
display
10. Working power supply: AC220V/50HZ
Performance Characteristics:
1. Standard metal test piece, composed of six
pieces in a group, a total of three groups.
2. Winding heater, heat evenly.
3. Gray cast iron reservior contains silicon 3.2%,
silicon 1.8%, manganese 0.75%, in line with standard requirements.
4. Aluminum radiator.
5. Automobile special aluminum pump test cycle.
6. The upper part of the radiator is equipped with
a heat-resistant glass observation window.
7. There is a thermometer jack on the reservior to
correct the temperature.
8. The brass bracket can be installed three groups
of test pieces.
9. Microcomputer temperature controller, digital
display, accuracy ±2℃ PT100 sensor.
quick overview :
The sample will be cycled
for 1064 hours in a closed system consisting of a reservoir, a water pump, a
radiator and a rubber tube at a certain temperature and flow rate. Its
corrosion resistance is determined by the weight loss of typical metal test
pieces used by the engine cooling system in the reservoir and the state of the
inner surface of each component. The variation in the performance of the sample
is determined by the periodic analysis of the sample taken from the system
during the test cycle. The simulated service tester is suitable for engine
coolant concentration and engine coolant.
Technical Parameters:
1. Applicable standards of simulated service
tester: ASTM D2570, SH/T0088
2. Liquid flow: 1.3 -1.6 l/s
3. Heating method: winding heating belt
4. Working time: 1064 hours
5. Temperature control mode: digital PID thermostat
6. Total power: 3.5KW
7. Temperature control range: 88±2℃
8. Timing mode: by digital display timer
9. Working pressure: 80 ~ 103kpa pressure gauge
display
10. Working power supply: AC220V/50HZ
Performance Characteristics:
1. Standard metal test piece, composed of six
pieces in a group, a total of three groups.
2. Winding heater, heat evenly.
3. Gray cast iron reservior contains silicon 3.2%,
silicon 1.8%, manganese 0.75%, in line with standard requirements.
4. Aluminum radiator.
5. Automobile special aluminum pump test cycle.
6. The upper part of the radiator is equipped with
a heat-resistant glass observation window.
7. There is a thermometer jack on the reservior to
correct the temperature.
8. The brass bracket can be installed three groups
of test pieces.
9. Microcomputer temperature controller, digital
display, accuracy ±2℃ PT100 sensor.
Product
Reviews
add Review
reviews
No Review Yet.
Related
Products
Oxidation Stability Apparatus For Oxidation Stability Of Mi...
Automatic Houillon Viscosity Tester
Technical Features:· &nbs...
Portable Digital Densitometer by U-Tube...
Features 1. U-Tube Oscillation Densitometer uses a touch...
Demulsibility Characteristics Tester of...
Significance and Use： · &nb...
Test standard:Standard Test method For Kinematic Viscosity...
Gasoline Octane Number by Research And M...
Technical Features: · ...
Touch Screen Carbon Residue Tester (Micr...
This instrument adopts industrial control computer system c...
Semi Automatic UV Fluorescence Sulfur An...
Semi Automatic UV Fluorescence Sulfur Analyzer For Gas...
Copyrights © 2025 All Rights Reserved by Atico
Product
Reviews
add Review
reviews
No Review Yet.