Showing all 213 results for "Mechanical Engineering Lab"
Mechanical Engineering Lab Equipment Manufacturer
If you are a college or university looking to setup a complete lab. Please contact us with your details for custom quotation.
Specification: 1. Experimental setup to demonstrate sim...
Technical Description: Supplementary set extends the scop...
Equilibrium Single Plane, Statically Det...
Equilibrium in a Single Plane, Statically Determinate S...
Equilibrium Of Moments On Pulleys
Equilibrium Of Moments On Pulleys Manufacturer and Supplier...
Forces in a Crane Jib Technical Description : Based on t...
Supplementary Set Pulley Blocks
Technical Description : Supplementary set Pulley Blocks e...
Deformation of Straight Beam Technical Description: Beam...
Method to Determine the Elastic Line
Method to Determine the Elastic Line Technical Specificat...
Torsion of Bar Technical Description: Torsion occurs pri...
Deformation of Bars under Bending or Tor...
Deformation of Bars under Bending or Torsion Technical De...
Deformation of Frames Technical Description: A frame is...
Deformation Curved Axis Beam Technical Description: In c...
Deformation of Trusses Technical Description: When a com...
Hookes Coupling Apparatus Technical Description: The tab...
Ackermann Steering Demonstrator
Ackermann Steering Demonstrator Technical Description: T...
Free and Forced Vibration Apparatus
Free and Forced Vibration Apparatus Technical Description...
Unit For Studying Forces In A Simple Bar...
Unit for studying Forces in a Simple Bar Structure Desc...
The apparatus is intended to represent a simple engine mecha...
MEC - Cable Forces And Pulley Block
MEC – Cable Forces And Pulley Blocks Manufacturer and Suppli...
Equilibrium Moments Two Arm Lever
Equilibrium of Moments on a Two-Arm LeverTechnical Descripti...
Equilibrium Of Moments On A Differential...
The experimental unit illustrates the laws for forming the...
Beams are important design elements in mechanical engineeri...
Trusses are bar structures in which the bars are only subje...
The four-joint link is a four-bar pivot gear. It converts r...
Whitworth Quick Return Mechanism
Technical Description:Whitworth’s quick return is used to ge...
Free and Forced Vibration Apparatus
Description: All set-ups of this experimental unit on th...
A solid understanding of the properties of materials is ess...
A classic discipline of materials testing is the destructive...
Bending Test Plastic Deformation
Mechanical stress, to which design elements are generally e...
The demands of modern, technically sophisticated designs re...
Using cutaway models it is possible to clearly demonstrate...
Using cutaway models it is possible to clearly demonstrate...
Using cutaway models it is possible to clearly demonstrate...
Different physical processes are used to measure temperatur...
Fundamentals Of Pressure Measurement
Measuring pressure is important in the engineering industry,...
Fundamentals Of Humidity Measurement
The measurement of air humidity plays an important role in...
Gas laws belong to the fundamentals of thermodynamics and a...
Convective Heat Transfer In Air Flow
Convective heat transfer refers to the transfer of heat bet...
Steam Power Plant With Steam Engine
In a steam engine, thermodynamic energy in the form of vapo...
In a steam power plant, thermal energy is converted into me...
A steam generator generates steam which will later be used...
Steam turbines are turbomachines. In practice, steam turbin...
Modular Test Stand For Single Cylinder E...
This test stand measures the power output of internal combu...
Simple Compression Refrigeration Circuit
The purpose of a refrigeration system is the cooling of mat...
Vapour Jet Compressor In Refrigeration
Unlike standard compression refrigeration systems, vapour j...
Solar Heat for Cold Production
With the increasing demand for refrigeration and air condit...
Cooling Using The Peltier Effect
The experimental unit demonstrates cooling using the Peltier...
The experimental unit generates cold and hot air with the a...
Changes Of State In The Refrigeration Ci...
In a compression refrigeration system a refrigerant flows t...
Refrigeration Circuit With Variable Load
It examines a refrigeration circuit under an adjustable loa...
Compression Refrigeration System
The setup of represents a typical refrigeration circuit con...
HSI Training System Refrigeration And Ai...
The base unit is, dependent on the objective of the experim...
It is part of the HSI training system for refrigeration and...
Model Of A Refrigeration System With Ref...
It is part of the HSI training system for refrigeration and...
Thermodynamics Of The Refrigeration Circ...
In this trainer, great care was taken to make the thermodyn...
Refrigeration System With Refrigeration...
Identifying faults in refrigeration systems requires compre...
Refrigeration System With Two-Stage Comp...
Refrigeration systems with two-stage compression are used f...
Refrigeration Chamber And Defrosting Met...
The climate in the cold storage room has a significant effe...
With simple and clear experiments this equipment is intended...
Refrigeration Training System, Base Unit
With this training system practical experiments relating to...
Refrigeration Components For Advanced Ex...
It enables in conjunction with the accessory set the perfor...
Refrigeration Components For Basic Exper...
It enables in conjunction with it and the accessory set the...
With the air-to-water heat pump the ambient heat of the air...
Heat Pump For Cooling And Heating Operat...
Refrigeration systems and heat pumps only differ in the def...
Electrical Installation In Refrigeration...
The wiring of electrical components is a typical task in the...
Electrical Connection Of Refrigerant Com...
The wiring of electrical components for the start and opera...
Assembly & Maintenance Exercise Refriger...
Using trainees can learn working within a complex project....
Replacement of Refrigeration Components
The replacement of a faulty compressor or other components...
Capacity Control and Faults In Refrigera...
The efficient control of the capacity and temperature in re...
Thermal Expansion Training Panel
The trainer comprises original components as used in heating...
Installation Technology Losses In Differ...
When flow passes through pipes, pressure losses occur due to...
Installation Technology Losses In Pipe B...
In addition to pressure losses due to pipe friction, pipes...
Installation Technology Losses In Straig...
The pressure curves of fluids in motion and fluids at rest...
Installation Technology Losses In A Pipe...
When water flows through a pipe system there are resistances...
Three-Way Mixing Valve Training Panel
The trainer was designed for heating and plumbing trainees....
Four Way Mixing Valve Training Panel
The trainer was designed for heating and plumbing trainees....
Circulating Pumps Training Panel
The trainer contains a pipe system with two circulating pum...
Expansion Vessel Training Panel
Using this trainer the function of a normal expansion vessel...
An electrically heated pressure vessel is mounted on the pa...
An electrically heated pressure vessel is mounted on the pa...
Domestic Heating Circuit Training Panel
A pump circulates water through four radiators. The tempera...
Air conditioning technology is a key topic in building serv...
Ventilation systems are used in many areas. They are used to...
Model of a Simple Air Conditioning Syste...
It is part of the HSI training system for refrigeration and...
In building services engineering ventilation systems are use...
Control Unit For Ventilation System
The trainer is required if the ventilation system is to be u...
Photovoltaic solar modules convert sunlight directly into el...
Illuminance, temperature and electrical load are the key var...
Stand Alone Operation of Photovoltaic Mo...
Stand alone operation of photovoltaic modules excludes any a...
Photovoltaic In Grid Connected Operation
Feeding electricity from photovoltaic solar modules into the...
Sanitation Fittings Training Panel
Sanitation fittings can be connected and investigated in res...
Drinking Water Installation Demonstrator
A typical household drinking water installation is fitted to...
The flushing process is intended to remove contaminants, for...
Protection of Drinking Water Training Pa...
An open pipe system that simulates a domestic installation f...
The routing of sewers is particularly important in wastewate...
Vapour Pressure of Water - Marcet Boiler
In a closed system filled with fluid, a thermodynamic equili...
Determination Of The Settling Velocity
The settling velocity of solids in fluids is an important fa...
In the field of fluid mechanics of incompressible fluids a d...
It is part of a series that allows experiments on the fundam...
Electronic Total Pressure Sensor
The simplest and therefore most common type of total pressur...
Pressure Distribution on a Cylinder
In order to examine the pressure distribution at bodies unde...
Pressure Losses in Pipe Elements
Pressure losses in the pipe flow of incompressible fluids ca...
Heat Transfer At A Cylinder In Transvers...
The aim of this basic experiment is to determine the heat tr...
Fluid mechanics is concerned with the physical behaviour of...
Aerodynamics describes the behaviour of bodies during flow a...
Pipe Friction for Laminar or Turbulent F...
During flow through pipes, pressure losses occur due to inte...
Hydrodynamics considers the relationship between the traject...
Pressure losses in the flow from tanks are essentially the r...
In fluid dynamics, a vortex is a circular flow of a fluid ca...
Transient Drainage Processes In Storage...
Transient drainage processes are taken into consideration wh...
Vertical Visualization of Flow Fields
Fine gas bubbles are perfectly suited to visualising flow fi...
Fine gas bubbles are perfectly suited to visualising flow fi...
The laminar, two-dimensional flow in it is a good approximat...
Visualization Of Different Flows
In research and training, flow processes are often considere...
The laminar, two-dimensional flow in it is a good approximat...
Wind Tunnel for Visualisation of Streaml...
Streamlines can be visualised in steady flow in the wind tun...
In impulse turbines, the working medium has the same static...
The trainer investigates the behaviour of a system in a two-...
Gas Turbine with Power Turbine
Gas turbines with free-running power turbines are used prima...
Jet engines are gas turbines which generate thrust. Jet engi...
Centrifugal pumps are turbomachines that are used for convey...
Series and Parallel Configuration Of Pum...
In complex systems, pumps can be connected in series or in p...
Characteristic Variables Of Hydraulic Tu...
Turbomachines such as pumps and turbines are energy converte...
Experiments With a Centrifugal Pump
Centrifugal pumps are turbomachines which are used to transp...
Hydraulic Circuit With Centrifugal Pump
Hydraulic circuits are designed according to their task and...
Centrifugal pumps are turbomachines that are used for convey...
Pump Characteristics for Parallel and Se...
In practice, several pumps are often installed either in par...
The experiments familiarise students with various pump types...
Assembly and Alignment Of Pumps And Driv...
A complete work process when repairing work machines such as...
The individual steps for repairing driven machines such as p...
The core piece of the experimental plant is the axial turbom...
Energy Conversion in a Wind Power Plant
It is used to study how kinetic wind energy is converted int...
Control Unit for Wind Power Plant
The generation of power in wind power plants covers a signif...
Modern wind turbines should be optimally adapted to the wind...
Wave energy converters use the energy from continuous wave m...
Four-Cylinder Diesel Engine For Load Un...
In conjunction with the load unit, the test engine is a comp...
Radial fans are used to transport gases with non-excessive p...
Axial fans are used to transport gases. The medium to be tra...
Experiments with a Radial Compressor
Radial compressors are used to compress gases. The medium is...
Characteristic Variables of a Radial Fan
Fans are key components of ventilation systems, providing ve...
Axial fans are connected in series in plants to increase the...
Piston Compressor In Refrigeration
DescriptionSmaller refrigeration systems usually have a pist...
Simulation of a Two Stage Air Compressor
When operating real compressor plants in industry, the speci...
Compressed air for industry and businesses that use compress...
Single Stage Piston Compressor
The generation of compressed air for industrial and commerci...
Hydrostatics is the study of fluids at rest. Phenomena occur...
Hydrostatic Pressure in Liquids
The weight of fluids at rest causes a pressure that is known...
In hydrostatics, the metacentre is an important point to be...
Floating Bodies for Stability of Floatin...
The accessory includes two transparent floating bodies with...
Hydraulic engineering is concerned with artificial waterways...
Zigzag sifters permit classification of solid compounds. The...
During sorting, a solid compound is separated according to i...
Convection dryers are often used for drying solids in food t...
Evaporators are used in process engineering and food technol...
Supply Unit for Chemical Reactors
The reactor is the core element of a chemical production fac...
Continuous Stirred Tank Reactor
Stirred tank reactors can be operated continuously or discon...
Tubular reactors are continuously operated reactors. They en...
Stirred tanks in series are, as the name says, continuous st...
Discontinuous Stirred Tank Reactor
Discontinuously operated stirred tank reactors are mostly us...
Plug flow reactors are tubular reactors and are operated con...
Reactors with laminar flow are tubular reactors and are oper...
Fixed biofilm processes are used in the biological treatment...
The SBR process is a biological, aerobic wastewater treatmen...
The activated sludge process is the most important biologica...
Airlift reactors are submerged reactors in which the energy...
Operating Principle of a Pelton Turbine
Water turbines are turbomachines utilising water power. The...
Operating Principle of a Francis Turbine
Water turbines are turbomachines utilising water power. The...
The Pelton turbine is a type of free-jet resp. impulse turbi...
The Francis turbine is part of the reaction turbines which c...
Propeller Type Turbine Trainer
Specification Function of a propeller type turbine Cl...
The Francis turbine belongs to the reaction turbines which c...
Action turbines operate according to the principle of equal...
Fundamentals of Wind Power Plants
In modern wind power plants, the power output from the wind...
The yield of a wind power plant depends on the prevailing wi...
A wind tunnel is the classic experiment system for aerodynam...
Biotechnical Production of Ethanol
As well as its great importance for the chemical and foodstu...
In a biogas plant, microorganisms biologically degradate the...
The use of renewable energy carriers in the mobility sector...
Heat exchangers transfer thermal energy from the flow of one...
Comparison of Various Heat Exchangers
In practice, different types of heat exchanger are used depe...
Fuel cells are energy converters that, unlike heat engines,...
Gas Turbine With Power Turbine
Gas turbines with free-running power turbines are used prima...
Hydronic Balancing of Radiators
Hydronic balancing is used to limit the amount of water whic...
Efficiency In Heating Technology
The trainer contains a complete closed heating circuit with...
Split system air conditioners are used to cool, dehumidify a...
Separation In Sedimentation Tanks
In sedimentation tanks, solids are separated out from suspen...
It demonstrates the clarification of raw water containing so...
Demonstration of Dissolved Air Flotation
Flotation processes are used to separate solids from a liqui...
Depth filtration is a key unit operation in water treatment....
One area of application of gas cyclones is the pre-filtratio...
In civil engineering, studies in hydrology are conducted in...
Hydrographs After Precipitation
Hydrographs are an important tool for the representation of...
In civil engineering, studies in hydrology are conducted in...
Flow through particle layers is widely encountered in proces...
Ball mills are a form of mills with grinding bodies. The dru...
DescriptionThis is a small-scale wind tunnel with an electri...
DescriptionAir enters the tunnel through an aerodynamically...
DescriptionAir passes into the through a honeycomb flow stra...
DescriptionThe Bench-Top Subsonic Wind Tunnel offers a compl...
DescriptionAir passes into the wind tunnel through a honeyco...
DescriptionThis experiment module illustrates Bernoulli’s eq...
DescriptionThis simple yet comprehensive experiment module c...
DescriptionThis module consists of a tube with a specially d...
DescriptionThis module consists of a duct in which there is...
DescriptionThis module consists of a smooth rectangular bend...
DescriptionThis module consists of an aerodynamically shaped...
DescriptionThis module consists of a duct with transparent f...
DescriptionThe multi-tube manometer is an ancillary to the A...
DescriptionA smoke generator and probe that allows students...
DescriptionThe Three-Component Balance fits onto the working...
DescriptionThe Balance Angle Feedback Unit is an ancillary f...
DescriptionThe Differential Pressure Transducer and readout...
DescriptionThe 32-Way Pressure Display Unit is an optional a...
Copyrights © 2019 All Rights Reserved by Atico